.44 Magnum Colt Anaconda in three barrel lengths Type Place of origin United States Production history Manufacturer Colt's Manufacturing Company Produced 1990—2003 Variants Specifications Weight. 47 oz. / 1.3kg (4 in bbl). 53 oz. / 1.5kg (6 in bbl). 59 oz.
- Colt Anaconda Serial Numbers By Year
- Colt Anaconda Serial Numbers By Year Chart History
- Colt Anaconda Serial Numbers By Year Chart History
- Colt Anaconda Serial Numbers By Year Chart
Colt's Manufacturing Company - firearms, handguns, pistols, rifles, revolvers. The year/serial numbers under Colt SP series was forwarded to me by an individual whose.I'm thinking some one changed the upper with a later model. It is a colt w/1-7 twist 5.56 nato cmpc on the barrel. Colt ar 15 sp1 serial numbers, colt ar sp.AR-15 Serial Numbers Pre- And Post-Ban. Please be advised that the information provided here is approximate, and should not be relied upon for legal, compliance, valuation, or other purposes which require definitive documentation.Enter the serial number, without spaces or dashes, to search the database. If multiple models appear for your serial number simply match the date with the appropriate.
Gun Tests Recommends: Colt Anaconda.44 Rem. If you are bored with revolvers, then the custom look of the Anaconda will make life interesting again. It has a high resale value and provides fine accuracy. Plus.44 Magnum offers perhaps the widest usable power range of any handgun.
/ 1.7kg (8 in bbl) Length. 9⅝ in / 24.5cm (4 in bbl). 11⅝ in / 29.5cm (6 in bbl).
Colt Anaconda Serial Numbers By Year
13⅝ in / 34.6cm (8 in bbl) length. 4 in bbl (102 mm). 6 in bbl (153 mm).
8 in bbl (203 mm). Double-action Feed system Six round cylinder Sights Adjustable open iron sights. Contents. Development Built on a new and heavier ‘MM’ frame, the Anaconda was brought out to compete with contemporaries such as the, the and, and the Model 44.
Colt Anaconda Serial Numbers By Year Chart History
Considering that many of these models had been marketed and sold for fully 35 years upon its introduction, the Anaconda was a very late entry into the large-bore market. Unlike most other pistols introduced in the 1980s and 1990s, the Anaconda was never offered with a finish, but was available only in. When originally introduced Anacondas were plagued with poor accuracy, but changes to the quickly corrected the problems to the point that Colt billed its new pistol as among the most accurate revolvers in production. Anaconda revolvers were primarily marketed for sport shooters and hunters, as they are too large for general duty use or, although made-to-order limited production versions of the gun continued to be available from the Colt custom gun shop until approximately 2003. Features Originally chambered for the.44 Magnum cartridge, in 1993 the Anaconda began to be offered in cartridge as well. Its fit and finish resembled an upsized married to a ventilated-rib barrel reminiscent of the.
Initially marketed with a satin brushed stainless finish, a highly polished mirror-like option known as 'Ultimate Stainless' was cataloged for a time through the Colt Custom Shop. Anacondas came equipped with four, six, or eight inch barrels, finger-grooved with colored 'Rampant Colt', large type and, as well as with a front and fully white outline rear. Some models were factory for mounting, while others shipped with reducing.
The trigger actions on these guns are rated as very high-quality, and the heavy-duty solid construction and weight tends to absorb recoil, making the Anaconda relatively easy to shoot with heavy loads. Kodiak Introduced in 1993, the Kodiak was similar to the Anaconda in that it was constructed entirely of stainless steel, but offered the additional features of a recoil-reducing factory magna-ported barrel and unfluted cylinder. There were 2000 Kodiaks made as a special run of Anacondas, breaking away from their long history of naming revolvers after snakes. A special run of 1000 King Cobras was made about the same time, having the same Magna-Ported barrel and unfluted cylinder and were called the Grizzly. There was an uncataloged 5' barrel version of the Anaconda, with reportedly less than 150 made.
Fundamentals Of Statistics By Sp Gupta.pdf - search pdf books free download Free eBook and manual for Business, Education,Finance, Inspirational, Novel,. Educational psychology by s.k chatterjee. Dec 23, 2017 - Statistics sem.iii iv (id).pdf - Applied Statistics: Kapoor & Gupta 6. Fundamental of mathematical Statistics: S.G. Gupta & V.K.kapoor 7. NORTH MAHARASHTRA UNIVERSITY JALGAONSYLLABUS UNDER SCIENCE FACULTY FOR F.Y.B.Sc. STATISTICS (Semester I and II) WITH EFFECT. Oct 26, 2016 - Sc Gupta And Vk Kapoor Statistics FREE Download. Ifneed to download pdf Fundamentals of statistics s c gupta manual. Fundamentals of mathematical statistics, gupta s. Sk Gupta And VK Kapoor Applied Statistics. S K Mondal's GATE, IES & IAS 20 Years Question Answers R. Fundamentals of Mathematical Statistics is a comprehensive book for. Fundamentals of Mathematical Statistics By S.C. Gupta – PDF Free. DOWNLOAD – Fundamentals of Mathematical Statistics By S.C. Gupta – Free Download PDF.
These 5' versions command very high prices when they are encountered. Additionally, Colt made an extremely low number of 4' barrel Anacondas chambered in.45 Colt. This ultra-rare variation commands a premium price when encountered as well. See also. References.
COLT ANACONDA COLT ANACONDA 'MM' FRAME In 1942 Colt discontinued it's large frame double action revolver, the New Service. Colt would not build another large frame model until 1990, when it introduced the Colt Anaconda. The Anaconda was a stainless steel revolver based on the proven King Cobra revolver design, using a transfer bar ignition-safety action. The Anaconda was specifically designed for unlimited use of.44 Magnum ammo and had a massive forged frame and cylinder heat treated to provide the maximum strength.
It was chambered in the.44 Magnum, and the.45 Long Colt. Barrel lengths were 4', 5' (Rare and not cataloged), 6', and 8'. Magna-porting for the barrel was offered on some versions. Unusually, the right side of the barrel was marked 'Double Action Revolver' and the usual 'Colt's P.T.F.A. Hartford Conn. USA' on some models, and '.44 Magnum Cartridge' and 'Colt's P.T.F.A. Hartford Conn.
USA', on other models. Finishes were satin stainless matte finish, bright polish stainless on some models, and in Realtree Camouflage. The Anaconda was produced from 1990 to 1999, then reintroduced from 2002 to 2006 as a Colt Custom Shop special order model. VARIATIONS Anaconda First Edition. Made to introduce the Anaconda model. It had an Ultimate Bright polished finish.
Marked on the barrel with 'Colt Anaconda First Edition'. Came in an aluminum carrying case.
Serial numbers ran from 'MM00001' to 'MM01000'. There were 1,000 made in 1990. This was a.44 Magnum with 4' or 6' Magna-ported barrel, with non-fluted cylinder.
The barrel is stamped with 'Colt Kodiak.44 Magnum' and a bear paw on the left side of the barrel. Serial numbers started with 'CKA'.
There were about 2,000 made in 1993. Anaconda Realtree Camouflage. This was an Anaconda fitted with a Redfield EER 2 1/2- 7x scope, and finished in Realtree Gray camouflage finish. It came in a soft case in Realtree camo marked in yellow embroidery with 'Team Colt Realtree'. It had an 8 inch barrel and was fitted with Hogue Mono-Grip rubber grips with a Serpentine Colt logo molded on the right side. The gun, scope, and mount were finished in Realtree gray camouflage.
The barrel was marked 'Colt Realtree.44 Magnum'. There were no iron sights fitted.
Colt Anaconda Serial Numbers By Year Chart History
Colt Anaconda Serial Number Search
Made in 1996. ANACONDA REALTREE CAMOFLAGE Anaconda Hunter. This was a.44 Magnum fitted with a Leupold 2x scope, a carrying case, cleaning accessories, and both walnut and rubber grips. Barrel was 8 inches. Made from 1991 to 1993. Anaconda Custom Ported. A.44 Magnum in 6' or 8' barrels with Magna-Porting.
Fitted with Colt Ellision Target rear sight. A custom contoured trigger, and Pachmayr rubber grips. The finish was brushed stainless. Made from 1992 to 1993, then reintroduced from 1995 to 1996, and again from 2002 to 2003. MAGNA-PORTED BARREL GRIPS Colt used the same size and shape grip frame on the Trooper Mark V, the King Cobra, and the Anaconda.
All grips interchange between these models. WALNUT TARGET GRIPS These were used on the First Edition Model and as an option.
Colt Anaconda Serial Numbers And Date Of Manufacture
HOGUE MONO-GRIP Colt used Hogue Mono-Grip rubber grips on some Anacondas. These had the Serpentine Colt logo molded into the right upper side. PACHMAYR 'GRIPPER' RUBBER REPLICA'S OF PACHMAYR GRIPPERS MADE FOR COLT BY VINTAGE INDUSTRIES. These had a Colt banner on the lower sides and silver Colt medallions.
| Colt Anaconda | |
|---|---|
| Type | Revolver |
| Place of origin | United States |
| Production history | |
| Manufacturer | Colt's Manufacturing Company |
| Produced | 1990–2003 2021–present |
| Variants | Kodiak Anaconda Hunter Anaconda Custom Ported Anaconda Camo[1] |
| Specifications | |
| Mass |
|
| Length |
|
| Barrel length |
|
| Cartridge | |
| Action | Double-action |
| Feed system | Six round cylinder |
| Sights | Adjustable open iron sights |
The Colt Anaconda is a large framedouble-actionrevolver featuring a full length under-barrel ejection-rod lug and six roundcylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Coltcenterfire ammunitioncartridges, the Anaconda marked the Hartford, Connecticut firm’s first foray into the popular large-bore Magnum pistolmarket.[2]
Development[edit]
Built on a new and heavier ‘MM’ frame, the Anaconda was brought out to compete with .44 Magnum contemporaries such as the Smith & Wesson Model 29, the Sturm, Ruger & Co.Redhawk and Blackhawk, and the Dan Wesson Firearms Model 44. Considering that many of these models had been marketed and sold for fully 35 years upon its introduction, the Anaconda was a very late entry into the large-bore handgun market.[3] Unlike most other pistols introduced in the 1980s and 1990s, the Anaconda was never offered with a carbon steelblued finish, but was available only in stainless steel.[2] When originally introduced, Anacondas were plagued with poor accuracy, but changes to the barrels quickly corrected the problems to the point that Colt billed its new pistol as among the most accurate .44 Magnum revolvers in production.[3][4] Anaconda revolvers were primarily marketed for sport enthusiast shooters and hunters, as they are too large for law enforcement general duty use or concealed-carry, although made-to-order limited production versions of the gun continued to be available from the Colt custom gun shop until approximately 2003.[2] In 2021, Colt resumed production of the Anaconda, using a new design with a stronger frame and an oversized Python action.[5]
Features[edit]
Originally chambered for the .44 Magnum cartridge, in 1993 the Anaconda began to be offered in .45 Colt as well. Its fit and finish resembled an upsized King Cobra married to a ventilated-rib barrel reminiscent of the Python's.[3] Initially marketed with a satin brushed stainless finish, a highly polished mirror-like option known as 'Ultimate Stainless' was catalogued for a time through the Colt Custom Shop. Anacondas came equipped with four, six, or eight inch barrels, neoprenesyntheticrubber finger-grooved combat-stylegrips with nickel colored 'Rampant Colt' medallions, large target type hammers and triggers, as well as open iron sights with a red insert front and fully adjustable white outline rear.[3][4] Some models were factory drilled and tapped for telescopic sight mounting, while others shipped with recoil reducing Magna-Ported barrels.[4] The trigger actions on these guns are rated as very high-quality, and the heavy-duty solid construction and weight tends to absorb recoil, making the Anaconda relatively easy to shoot with heavy loads.[3][4]
Kodiak[edit]
Introduced in 1993, the Kodiak was similar to the Anaconda in that it was constructed entirely of stainless steel, but offered the additional features of a recoil-reducing factory magna-ported barrel and unfluted cylinder.[6]
There were 2000 Kodiaks made as a special run of Anacondas, breaking away from their long history of naming revolvers after snakes.[6] A special run of 1000 King Cobras was made about the same time, having the same Magna-Ported barrel and unfluted cylinder and were called the Grizzly.[6] There was an uncatalogued 5' barrel version of the Anaconda, with reportedly less than 150 made. These 5' versions command very high prices when they are encountered.[citation needed] Additionally, Colt made an extremely low number of 4' barrel Anacondas chambered in .45 Colt. This ultra-rare variation commands a premium price when encountered as well.
See also[edit]
References[edit]
Colt Anaconda Serial Numbers By Year Chart
- ^Scepaniak, Adam. 'Wheelgun Wednesday: The Colt Anaconda 44 Magnum has Returned!'. The Firearm Blog.
- ^ abc“Colt mk. V revolvers: Trooper, KingCobra, Anaconda (USA)” World Guns Web site. Accessed November 26, 2008.
- ^ abcdeTaffin, John. 'Colt's Biggest Snake, the Anaconda'. Sixguns.com. Retrieved November 26, 2008.
- ^ abcd'Anaconda'. Colts Mfg. Archived from the original on January 13, 2007. Retrieved November 26, 2008.
- ^Moss, Matthew (2021-03-22). 'Colt To Bring Back the Anaconda'. The Firearm Blog. Retrieved 2021-03-23.
- ^ abcSapp, Rick (2007). Standard Catalog of Colt Firearms. F+W Media, Inc. p. 125. ISBN978-0-89689-534-8.
External links[edit]
- Video of operation on YouTube(in Japanese)